- Engine:
-
Model: Cummins M-11, 6 cylinder, Turbo Charged, Direct
Injection, Water Cooled
-
Power - 350 hp @ 2,100 rpm, 261 kw @ 2,100 rpm
-
Peak Torque - 1,150 lb-ft @ 1,300 rpm, 1,559 Nm @ 1,300
-
- Attachment Hydraulic System:
-
Pump type - Dedicated closed loop variable displacement
axial piston. Pump flow is bi-directional & infinitely
variable. Flow direction & oil volume is operator
controlled.
-
Flow & Pressure Capability - 100 gpm@5,200psi, 379 l/m@365
kg/cm2 rated for continuous operation.
-
Plumbing - 1 1/4” Code 62 rated 24,000 psi minimum burst
pressure
-
- Attachment Controls:
-
Attachment rotational speed & direction of rotation
controlled from the right joystick handle.
-
One excavator auxiliary function controlled from the left
joystick handle is standard.
-
A second excavator auxiliary function also controlled from
the left joystick handle is optional.
-
Gauges for Main, Charge, Pump Case Pressure, Loop & Tank
Temperature, Low Oil Warning Lamp.
-
- Forestry Guarding:
-
3"
heavy wall square tubing, rubber isolated, steel mesh and Lexan
window guard.
|
 |
 |
Carrier Dimensions: |
|
|
|
A. Tumbler Distance |
12'0" (3650) |
G. Minimum Ground Clearance |
1'7" (480) |
B. Overall Length of
Crawler |
14'7" (4440) |
H. Track Gauge |
7'10" (2390) |
C. Counterweight Ground Clearance |
3'6" (1060) |
I. Overall Length |
32'9" (9982) |
D. Tail Swing Radius |
10'9" (3277) |
J. Overall Boom Height |
9'10" (2990) |
E.
Upperstructure Overall Width |
8'10" (2700) |
K. Track Shoe Width |
28" (700) |
F. Overall Cab Height |
9'7" (2920) |
L. Overall Cab Width |
10'2" (3090) |
|
Carrier Hydraulic system: |
|
Main pump:
|
Relief valve setting: |
Type - 2 variable displacement piston pumps
|
Implement
Circuits-4690psi (330kgf/cm2) |
Max flow - 2 x 58.1 gpm (220l/min)
|
Travel -
4690psi
(330kgf/cm2) |
Sub-pump for pilot circuit
- Gear pump
|
Power
boost - 5120psi (360kgf/cm2) |
Cross-sensing and fuel saving pump system
|
Swing
circuit - 3410psi (240kgf/cm2) |
Hydraulic motors: |
Pilot
circuit - 500psi (35kgf/cm2) |
Swing -
Axial piston motor with automatic brake |
Service
valve - Installed |
Travel - 2 speed axial piston motor with parking brake |
|
Drive & Brakes: |
|
Drive method - Fully hydrostatic type
|
Max drawbar pull -
46,500 lbf (21,100 kgf) |
Drive motor - Axial piston motor, in-shoe design |
Max
travel speed - 3.3 mph(high)/2.1 mph |
Reduction system - RV gear |
Gradeability - 70% (35 degrees) |
Parking brake - Multi Wet Disk |
|
|
|
|